Mechanical Separation to Reduce Phosphorus Levels in Slurry for Field Application

Date published: 28 June 2022

Area of Expertise:

Livestock slurries are an important source of plant nutrients for crop growth in our mainly grass-based local agriculture sector. However application of slurry to agricultural land can lead to phosphorus (P) loss to water courses through run-off, causing subsequent water quality and ecosystem problems.

Dr Gary Lyons collecting a sample of separated slurry solids

Through a DAERA funded project, AFBI evaluated the effectiveness of two mechanical separation technologies (Screw Press and Decanter Centrifuge) to reduce P levels in land-spread slurry and anaerobic digestate.

Background

Livestock slurries are useful and valuable sources of plant nutrients. Their uses on farms as fertilisers help close the nutrient cycling loop. However, in areas with intensive livestock farming systems like those in the dairy sector, the quantities of nutrients available in slurries on a particular farm can exceed the nutrient requirements of grass grown on that farm.

The Screw Press (foreground) and Decanter Centrifuge separators at AFBI Hillsborough.
The Screw Press (foreground) and Decanter Centrifuge separators at AFBI Hillsborough.
Applications of P that are surplus to crop requirements can result in high losses to groundwater and surface water, where eutrophication can cause reduced functioning and biodiversity of aquatic ecosystems and a decline in surface water quality.

Many of our most productive and intensive dairy farms have high soil P levels throughout their holding and need to move to a more sustainable position, as they make a vital contribution to agricultural productivity.

Table 1. Annual costs (£) for treatment of 4000 t of slurry by screw press and by decanting centrifuge (£/4000 t and £ t-1)taken from Meller et al., 2000)
Variable Screw Press Decanting Centrifuge
Maintenance and repair 250 1,250
Electricity (0.04 £/kWh) 80 480
Capital costs 1,424 7,119
Total yearly costs 1,754 8,849
Total costs £/tonne 0.44 2.21
Total costs £/kg of TP in solid fractionb 1.6 2.0

aYearly maintenance is calculated as 2.5% of the investment (1). Electricity consumption wasset at 3.0 kWh t-1 for decanting centrifugation and 0.5 kWh t-1 for a screwpress.

bAssuming 20% and 80% removal of fTP in a screwpress and a decanting centrifuge, respectively (pig slurry with 1.4g TP per litre).

Technologies are available to separate P from livestock slurries, reducing the P-load applied to agricultural land from these sources and helping to lower environmental risks to water quality. Such treatment technologies, allied with separated solids processing and P export to areas where it is required, would improve the environmental sustainability of dairy farm nutrient management.

AFBI Research

AFBI undertook a comprehensive review of published scientific literature on the effectiveness of these separation technologies to reduce the P loading of slurry and digestate before land application. AFBI also carried out trial work using the Screw Press and Decanter Centrifuge technologies installed at their Farm Nutrient Management Centre at Hillsborough. Both technologies partition a proportion of the insoluble materials (including the P) in slurry in to a separated solids fraction and also produce a separated liquid fraction with lower solids and P content.

Table 2. Screw Press (SP) and Decanter Centrifuge (DC) separation efficiencies for dry matter (DM), total nitrogen (TN), and total phosphorous (TP) reported in 22 studies. Separation efficiency is quoted as the percentage of the analyte from the input feedstock that was partitioned to the solid fraction.
  Separation Efficiencies
Separation Type DM (%) TN (%) TP (%)
Pig + cattle slurries SP 13-65 3-28 6-33
Pig + cattle slurries DC 35-65 5-40 30-79
Pig + cattle slurries DC + polymer 71 41 93

The research examined capital and operating costs, separation efficiency and throughput, the use of chemical additives, management and processing of separated fractions including transport costs, environmental impacts and the biosecurity of separated solids for export.

Of the two technologies reviewed, Screw Press separation is a more cost effective option when lower amounts of export of P off-farm are acceptable. For farms and those with anaerobic digesters managing larger volumes of manure/digestate, Screw Press separation is possible, however if higher levels of P removal are required, the use of Decanting Centrifugation is a viable option. Centralised processing facilities could also make use of Decanter Centrifuge technology to act as processing hubs for a number of local farms within a distance that makes it economical for transport of slurry/treated slurry to/from the processor.

Both separation technologies could be integrated in to agricultural slurry and digestate management systems, to provide a more sustainable approach to managing agricultural P loss and its associated impact on water quality.

Simplified diagrams with digestate as a feedstock of (a) a screw press separator and (b) a decanting centrifuge separator, showing feedstock input, mode of action, separation chamber, and solid and liquid fraction outlets (reproduced by permission from Fu
(a) a screw press separator and (b) a decanting centrifuge separator, showing feedstock input, mode of action, separation chamber, and solid and liquid fraction outlets (reproduced by permission from Fuchs and Drosg, 2010).
The research highlighted that Screw Press and Decanter Centrifuge separation could reduce phosphorous content in slurry and digestate separated liquid fractions by up to 34% and from 30 to 93% respectively, depending upon the type of technology deployed and operating conditions. The separated solid fraction could be further processed (anaerobic digestion, composting, drying, pelleting, soil amendment, fuel source) improving the economic feasibility of export distances, or potentially to create a product that could be used locally. However, such processing could be associated with high volatile nitrogen (N) losses and greenhouse gas emissions which may involve the use of abatement technologies to avoid pollution swapping. N losses can also be significantly reduced by acidification of slurries/digestates to pH 5.5. The export of separated solids for better P management is a possible biosecurity issue and precautions may need to be taken to reduce the risks of cross infections caused by pathogenic microorganisms depending upon end use.

Conclusion

Increases in agricultural productivity and production efficiencies must be coupled to reduced impacts if they are to be truly compliant with environmental sustainability in the circular bio-economy. The idea of “climate-smart” agriculture with in-built environmental safeguards is of paramount importance.

Mitigation of environmental risks to water quality through adoption of new slurry and digestate management practices, including options for nutrient export off-farm, are key to achieving environmentally sustainable farming systems.

Both separation technologies studied result in liquid fractions with reduced solids content so low emission spreading technologies can be deployed, resulting in improved percolation into the soil and better control of the applied N with potential for increased yield relative to untreated slurry, due to higher bioavailable N content and less N loss to the atmosphere.

Over time, application of separated slurry liquid fractions with significantly reduced P content and export from the farm of the solids containing the separated P, should mean that farm P balance is reduced to more manageable levels that minimise environmental impacts.

Notes to editors: 

AFBI is an arms-length body of DAERA delivering research and development, diagnostic and analytical testing, emergency response capability and expert scientific advice for DAERA and other government departments, public bodies and commercial companies in Northern Ireland, and further afield.

AFBI’s Vision is “Advancing the Local and Global Agri-Food Sectors Through Scientific Excellence”.

AFBI’s core areas:

  • Leading improvements in the agri-food industry;
  • Protecting animal, plant and human health;
  • Enhancing the natural and marine environment.

Share this page